Home > Traders and Suppliers > Panelwork Suppliers > Stanpart/steelcraft
Your recommendations and experiences with Triumph traders, suppliers and restoration companies.

Section : Panelwork Suppliers


Stanpart/steelcraft

Posted By : Chris Stanley, 13-Mar-2006, 10:21am

Hello all,

Just bought a pair of inner spit sills off ebay - they were advertised as "still having a Stanpart sticker attached". Once got them, I find the sticker is actually a steelcraft one...have I been had?

Also recently bought outer sills in the Rimmers parts sales...these were described as original (OE) sills and they both have on them the Heritage sticker. They've got the 3 drain holes in the bottom, but the edge where the back of the sill meets the B post panel is basically just a cut off with a slight camber on the edge (sorry, I know it's difficult to describe) - again, is this right? I was expecting this bit of the sill to have been 'edge-set' so that it sets against the B post panel with a slight underlap so as creating a small gap on the outer surface to fill with weld.

Chris



Followups :