Home
> Traders and Suppliers > Bodywork Restoration > Good welder required nr
Norwich
Your recommendations and experiences with Triumph traders, suppliers and restoration companies.
Section : Bodywork Restoration
Posted By : Colin Maxwell, 20-Sep-2005, 03:56pm
Hello there,
Whilst solving some throttle niggles over the weekend I was kneeling over the sill on the driver side pushing the accellerator pedal with my hand (dont
ask!) when i noticed a concetration of brown on the sill just in front of the step in the floor to encorporate the chassis outsrigger....at first i thougt
it is was an accumulation of 30 yr old carpet clue, but as i poked around with the magic rust finding device, aka the screwdriver, my worst fears we're
realised.
I was just wondering if anybody had some experience or knowledge of who in the Norwich area is good but also competative pricewise for repairing such a
job.
There seem to be a few local folk who would take it on but i'd rather go to a tried and tested place, buy cheap buy twice and all that.
I appreciate your advice and help
Thanks
Colin
-
Posted By : Dave Cox, 22-Sep-2005,
04:37pm
Hi Colin
Have you contacted David at Anglian Triumphs, Ditchingham.
He may be able to Help you or advise of a good welder locally.
Regards
Dave