Home
> Spitfire > Electrical Equipment > Map light
Anything and everything Spitfire.
Section : Electrical Equipment
Alternators, dynamos, lights, wipers, etc.
Posted By : Andrew Robinson, 11-Jan-2007,
09:37pm
Hi,
Acquired a 2nd hand map reading light and would appreciate a bit of advice on wiring it in.
I know the bulb works but that's all. There's one single wire coming out of the bottom, no in-line fuse and no switch.
Cheers folks,
Andy
-
Posted By : Graham Wadsworth, 12-Mar-2007,
08:57am
AS far as I understand it, the single wire is from the fuse box and the earth is from where the light mounts in the glove box. The light comes on when
it is bent toward the passenger and goes off when it's bent back again.
Cheers,
Graham