Home
> Triumph Motorsport > Car Preparation > Rotor Arms
A MessageBoard dedicated all aspects Triumph Motorsport, including TRR/TSSC Racing, Trials, Hillclimb and Rallying
Section : Car Preparation
Posted By : Andy Vowell, 29-Nov-2005,
07:48pm
Hello All
Back at Pembrey where I scored a big fat zero because my rotor arm disintegrated, we had a long discussion concluding that they don't make rotor arms like
they used to and the best were made with the contact mounded in the top of the plastic. However these are like rocking horse doo dahs to get hold of.
Well there is a batch for sale on ebay for a pittance so if you have a lucas dizzy fitted get one for your spares box.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&it...
Cheers
Andy
-
Posted By : William Davies, 29-Nov-2005,
08:18pm
This is the standard item which is available throughout the trade. I wouldn't get too excited, they're normal 45D rotor arms and will behave exactly
like the others made by this manufacturer,
Cheers,
Bill.