Home
> Herald > Dashboard and Instruments > Help with wiring Rev counter
,please.
Anything and everything Herald. Talk about anything from the first 948s to the last 13/60s.
Section : Dashboard and Instruments
Posted By : Paul Watton, 11-May-2007, 09:50pm
I would be pleased to hear from anyone who has successfully wired up one of these little yazakis without too many things going bang. I have searched for
many hours through previous postings but have not found a definite solution. I feel that my last chance might be 'ask elvis' on steve wright.
Many thanks, paul
Help with wiring Rev counter ,please.
-
Posted By : Colin Wake, 11-May-2007,
09:59pm
Should be easy.
Red is 12v feed to the back light.
The black must be earth.
That leaves yellow and blue, 1 will be a 12v feed and the other goes to the coil.
Get it wrong way round and it won't work, right way round and it will.
Any chance of a better photo???
Cheers
Colin
-
Posted By : Paul Watton, 11-May-2007,
10:09pm
Thanks Colin, But does the yellow or blue just need waving near or wrapping around coil to points as opposed to actually connecting to the
terminal?