Home > Herald > Dashboard and Instruments > 13/60 with Vitesse Dashboard - Help!

Anything and everything Herald. Talk about anything from the first 948s to the last 13/60s.

Section : Dashboard and Instruments

13/60 with Vitesse Dashboard - Help!

Posted By : William Penrice, 19-May-2004, 12:11pm

Need electrical help.
Have a 13/60 Herald with a Vitesse dash.

Looks great but I have three small dials, oil temp,
fuel and amps in middle that are nicely lit but don't work.

I also have the standard speedo dial that shows speed, fuel and temp... this all works fine.

Anyway I can connect it up so that it all works???

Plus clock but I guess that is just power?

Any ideas would be great

Thanks

Will

Followups :

13/60 with Vitesse Dashboard - Help!

Posted By : Steve Cureton, 22-May-2004, 09:47am

I don't know of an oil temp gauge, do you mean oil pressure? Gauges are not difficult to wire in as long as you have the correct sender units and know a bit about car electrics. I suggest you try and find a local Triumph buddy in your locality to show you the ropes. I live in Shropshire and will be happy to help if you're local?