Home
> Herald > Gearbox > Need Cluster Gear & Shaft -
QUICK
Anything and everything Herald. Talk about anything from the first 948s to the last 13/60s.
Section : Gearbox
Clutch, gearbox, overdrive, propeller shaft.
Posted By : Bill Goodwin, 08-Feb-2005, 08:39pm
Hi all: One of my Heralds is in the shop with the tranny apart. Need a cluster gear and shaft as soon as they can be found. Prefer new but will take like
new or close. Will pay for quick shipping to the USA direct to my shop. I will do the best I can to pay thouse of you who do not take PayPal. Will even pay
someone who does and they can send it to you if they will. Any of you who knows of a vendor who might have one. Have tried Bill Davies, Canley, S. Kennedy
and Rimmer Bros. Along with the normal US vendors. Please look and ask around and you can E-Mail me direct redrag@radix.net Thank You: Bill
-
Posted By : James Carruthers, 09-Feb-2005,
10:44am
Bill - I happen to have an entire 3-rail 3-synchro Herald 1200 gearbox in my garage.
Having never taken one apart - I'm not sure how long it takes... but shipping the whole thing could be rather expensive...
James
-
Posted By : Chris Taylor,
09-Feb-2005, 07:14pm
If you've ever taken a box apart before, you should be able to strip down the 3 synchro box in about half an hour! I did my last one sat on the
lawn in the sunshine! It's putting it all back together properly that takes the time!
-
Posted By : James Carruthers,
09-Feb-2005, 07:18pm
Maybe I can be of service to Bill then...
-
Posted By : Bill Goodwin,
10-Feb-2005, 06:16am
Thanks guys: One can take anything apart. What to do after that well? It was worth a try and the shop called again today and they think
they found what they need. I agree a entire trans would be costly to ship as I can't drive over and pick it up my truck is a 4X4 but don't
float. It could be worse as we could try to dissamble and reassemble a automatic trany! Bill