Section : Carburettors

Refurbishing Inlet Manifold

Posted By : Mick Wallace, 02-Apr-2007, 06:38pm

• Refurbishing Inlet Manifold

  Posted By : Lindsay Dearing, 02-Apr-2007, 11:26pm

  Mick, You want to speak to Ian Gittings. He pioneered fitting a stainless pipe and recutting the banjo bolt thread in my Mk3 manifold. See photo.
  If you want his e-mail address, contact me off post and I will supply it.

  
  
  Refurbishing Inlet Manifold