Anything and everything GT6.

Clutch, gearbox, overdrive, propeller shaft.

I think i know the answer to this but i would rather check than break something.

Im trying to remove the gear shift knob (overdrive) and have removed the top cap and separated the switch from the top cap. I can see what i believe is a slotted circular retainer which i assume is holding the knob onto the threaded shaft of the main gear stick. I have tried a few gentle taps with narrow blunt screwdriver but it doesnÂ’t want to budge so thought i had better check that my assumptions are correct before doing any damage?

Its nothing silly like and opposite thread is it, am i just not tapping hard enough or am i completely off the mark and theres something else holding the knob on?


Thanks - Andy